Doorking 8080-057 Monitored Photoeye

DKS 8080-057 Monitored Reflective Photo Eyes

DKS 8080-057 is a photo-cell reflective, 35-ft with 10K resistor. A reflective photoeye consisting of a transmitter and reflector. Wired only on the transmitter side. Slick looking, easy to install with a 35ft sensing distance capacity.

Monitored Entrapment Protection

• Type B1 non-contact devices (such as photo-beams) and/or Type B2 contact sensors (such as reversing edges) are required for most automatic gate system applications. DKS gate operators require a minimum of one (1) device to be connected in each direction of travel – otherwise, the operator will not run. All entrapment devices used with DKS gate operators are monitored per the requirements of the UL 325 Standard for Safety.

Non-Contact Photo Beam Detector

• Compatible with all DKS Gate Operators.
• When the Photo Beam is blocked by a person or object obstructing the gate path the Operator automatically reverses the gate to avoid injury and/or damage to the obstruction, gate, and Gate Operator.
• Compliant with the UL 325 Standard for Safety.
• Customers can add a Photo Beam to each end of the gate or pair it with the Edge Detector. When installed correctly and combined with the inherent Fail-Safe Clutch design this setup provides a safe operating environment.

Barrier Gate Safety

• In today’s busy world people often forget to pay attention to their surroundings and can inadvertently place themselves in harm’s way. DKS Barrier Operators (1601, 1602, and 1603) now offer the DKS Pedestrian Protection System, a vehicular/pedestrian detection system that knows when it’s safe to allow the Barrier Arm to come down — or not. The System reverses the Barrier Arm if a person is detected, and lowers the Barrier Arm if an unauthorized vehicle enters, preventing accidents and injury.

Specifications

• 10-25 VAC / 12-30 VDC
• 35 Ft. (10.6m) maximum sensing distance